Skip to main content

​
① PC Setup

​
Main PC

​
Disable following options

  • PCIe Native Power Management -> Disable
  • XHCI Toggle -> Enable
  • MSI Fast Start -> Disable
  • Fast Boot -> Disable
  • Local ASPM -> Disable
If some motherboards don’t have these features, they can be ignored

​
Use our Custom PowerCFG

  1. Run Powershell as ADMINISTRATOR.
  2. Paste, Run following command and hit Enter.
powercfg -duplicatescheme e9a42b02-d5df-448d-aa00-03f14749eb61
  1. In windows search, search powercfg.cpl and open it.
  2. Choose Excellent Plan.

​
Second PC

​
Required Runtime

WebView2

Download and go through the installation.

VC Runtime

Download latest VisualCppRedist_AIO_x86_x64.exe and go through the installation.

DirectX Runtime

Download and go through the installation.
Install all runtime above.

​
Replacing Leechcore

Modified Leechcore

Download the leechcore.dll.
Recommended backup the original leechcore.dll before replacing it.
  1. Download the Modified Leechcore above.
  2. Open your DMA Software folder, replace the leechcore.dll with the downloaded leechcore.dll.

​
② Flash in your Ditto Firmware

PRECAUTION
  • Ditto Firmware requires firmware activation every time the host computer is powered on, otherwise it will not load Windows properly.
  • Do not flash Ditto Firmware without owning/purchasing a Ditto Firmware Subscription.
  • Do not flash Ditto Firmware without owning/purchasing a Ditto Firmware Subscription.
  • Do not flash Ditto Firmware without owning/purchasing a Ditto Firmware Subscription.

Ditto Firmware

Download suitable Firmware Type for your DMA board.

Flash Firmware [Auto]

Go through this steps for fully auto firmware flashing. (Recommended)

Flash Firmware [Manual]

Go through this steps for manual firmware flashing.

​
Which Firmware Type to download?

Activator Naming Logic: [Activator] Ditto + Build Number + Version.exe
Example: [Activator] Ditto_030Preview15.exe == Ditto Version 0.3.0 Preview 15Firmware Naming Logic: [Firmware] + Build Number + Version + Board Type
Example: [Firmware] 030Preview11_35T.bin == 35T Firmware Version 0.3.0 Preview 15
  • 35T DMA Board -> Choose download firmware with 35T / squirrel_top
  • 75T DMA Board -> Choose download firmware with 75T / x1_top
  • 100T DMA Board -> Choose download 100T/zDMA
  • M.2 DMA Board -> Choose download M2 / m2_top